
Price: ₹ 350.00 - ₹ 332.00
(as of Jun 03,2023 01:05:06 UTC – Details)
Product Description
Contact & Component Cleaner Spray, Grade 8003 is a pressurised aerosol spray cleaner for cleaning, maintaining and servicing electrical and electronic components, switches and circuits boards. It does not contain any lubricants. It is composed of a special cleaning fluid exhibiting low surface tension, high solvency, relatively rapid evaporation characteristics and deep penetrating properties. It does not attack metals and common plastics. However, certain delicate plastics and PCB protective coatings may be affected on contact. Being a pressurised, cold cleaning solvent, it readily dissolves contaminants such as dust, dirt, oils, greases, waxes, flux, carbon deposit etc and flushes them away.
Applications
It is commonly used to clean electronic components and circuit boards of Television, Radio and Audio Equipment, Computers, Phones, Fax machines, telecom equipment, electronic household, Industrial, office and medical equipment etc.
Also used to clean commutators, coils, relays, battery terminals, bus bars etc.
Key performance properties
• Excellent cold cleaning property.
• Free from moisture.
• Fast & residue free evaporation.
• Jet spray action ensures reach into inaccessible zones.
• Flush Off ability due to pressurised spray action.
• Free from Ozone depleting substances and Chlorinated solvents.
Method of use
Attach extension tube to the nozzle. Spray directly on the desired surface. Dirt and grime removal shall take place immediately. For stubborn dirt, use a hard brush to clean and spray again. Blackened surfaces may not be cleaned due to permanent tarnish. As certain coatings on PCB may not be compatible with this cleaner, a compatibility test must be done on a small area of the PCB to ensure acceptability, prior to full scale use.
Storage & Handling Instructions
Precautions during storage and use
Store in a cool and dry place, below 50°C. The Cans should normally be used with in twenty four months from date of mfg. Most cans perform normally even after extended storage but prolonged storage may affect the packaging components.
The contents of this aerosol are highly flammable and these cans should be kept away from sources of heat and ignition. If used in an enclosed area or space, ventilate before energizing or any form of ignition. Do not spray on flame or ignited materials. The contents may not be compatible with certain special plastic or painted/coated surfaces and should be tested before full-scale use.
The cans are pressurized and should not be punctured, incinerated or exposed to severe damage. This may cause the can to burst violently. Use in a well-ventilated area and avoid excessive inhalation, eye or skin contact. Keep away from children.
Information on Disposal of used Cans
Aerosol Cans are designed for single use only and are hazardous even when apparently empty. The cans must be completely evacuated by pressing the valve so that negligible gas remains inside and then must be punctured to release the remaining gas vapor. This shall render the can to be non-hazardous and fit for disposal as per local environmental norms.
Free from moisture. Fast & residue free evaporation. Jet spray action ensures reach into inaccessible zones. Flush Off ability due to pressurized spray action. Being a pressurized, cold cleaning solvent, it readily dissolves contaminants such as dust, dirt, oils, greases, waxes, flux, carbon deposit etc and flushes them away.
Aerol Contact & Component Cleaner Spray, Grade 8003 is a pressurized aerosol spray cleaner for cleaning, maintaining and servicing electrical and electronic components, switches and circuits boards.
It does not contain any lubricants. It is composed of a special cleaning fluid exhibiting low surface tension, high solvency, relatively rapid evaporation characteristics and deep penetrating properties. It does not attack metals and common plastics.
Free from Ozone depleting substances and Chlorinated solvents.